The Luna 700R. The same amp as the 200 but more then double the power. Developed to be completely unique compared to similar amps. The proof is in the tone and there’s no doubt when you hear it. Designed to be the perfect amp for any instrument.
The Luna 700 has dynamic, active and useful tone controls. Capable of delivering plenty of volume and head room for any gig, on any instrument.
Input Jack: The Luna amps feature one ¼” input. Impedance is 1mg Ω buffered. Allowing for different gains and impedances to be used without changing the character of the sound.
Volume Control: The volume control is post EQ. Allows for setting the EQ of the sound and tone without having the gain through the EQ change it’s function.
EQ: Active treble and bass controls +/- 12 db cut or boost, unity at 12o’clock position.
Midrange Notch: The midrange notch controls the frequency of the midrange cut. It is variable between 200 Hz and 5 kHz, covering the frequencies between the Treble and Bass controls. The mid control sets the depth of the notch, and at zero takes the midrange out of the circuit. (Unity)
Line Out: The Line Out / DI is pre volume control. Low impedance with a ground lift. It is pre volume control to allow the front of house or player to set a volume level without allow the master volume to affect the level going out of the amp.
Output Section: Output power 1kHz, 1% distortion, 710 Watts @ 4 ohms.
Minimum impedance 3 ohms.
Universal mains power 100 – 240 vac 50 / 60 Hz.
Short circuit, over current and thermal protection.
