One of a kind 1x12 combo by Raezers Edge. Powered by their Luna 200R amplifier head built into this beautiful Alligator skin open back combo cabinet.
Loaded with a Jensen Jet Tornado Neo 100 watts @ 8 ohms.
The unit weighs just 19 lbs.
Comes with a padded cover.
Introducing the new Luna 200R Combo Series. The same 200 watt amplifier as the head units, now available as a combo.
– Onboard Digital Reverb
– DI Line Out
– Clean Boost Switch
– Compact & Lightweight
Luna EQ: Active treble and bass controls +/- 12 db cut or boost, unity at 12 o’clock position.
Midrange Notch: The midrange notch controls the frequency of the midrange cut. It is variable between 200 Hz and 5 kHz, covering the frequencies between the Treble and Bass controls. The mid control sets the depth of the notch, and at zero takes the midrange out of the circuit. (Unity)
Input Jack: The Luna amps feature one ¼” input. Impedance is 1mg Ω buffered. Allowing for different gains and impedances to be used without changing the character of the sound.
Volume Control: The volume control is post EQ. Allows for setting the EQ of the sound and tone without having the gain through the EQ change it’s function.
EQ: Active treble and bass controls +/- 12 db cut or boost, unity at 12o’clock position.
Midrange Notch: The midrange notch controls the frequency of the midrange cut. It is variable between 200 Hz and 5 kHz, covering the frequencies between the Treble and Bass controls. The mid control sets the depth of the notch, and at zero takes the midrange out of the circuit. (Unity)
Line Out: The Line Out / DI is pre volume control. Low impedance with a ground lift. It is pre volume control to allow the front of house or player to set a volume level without allow the master volume to affect the level going out of the amp.
Output Section: Output power 1kHz, 1% distortion, 210 Watts @ 8 ohms.
Minimum impedance 3 ohms.
Universal mains power 100 – 240 vac 50 / 60 Hz.
Short circuit, over current and thermal protection.
