The DoubleShot Combo consists of the DoubleShot speaker and The AI Clarus 2 integrated amplifiers. There are rubber stops on the top of the cabinet that hold the amp head in place. When the amp is placed on top against the stops and the speaker is connected, a unique “combo” is formed. 

The DoubleShot is a compact (12in D x 11in W), lightweight (20 lbs.) 2x10 plus 1x5 speaker system for acoustic and electric instruments. The system is unique, with the woofers mounted in a side-firing configuration and the midrange firing forward. The result is a highly portable, yet great sounding speaker system.

The DoubleShot is an evolution of the Acoustic Image UpShot speaker, with a second 10-inch driver and 5-inch midrange added to the design. It is, by far, the smallest and lightest 2x10 system available. Its small size belies its outstanding full range sound.

The DoubleShot is also available as part of three combos you can find available in our web store.

Speaker Cabinet Features

• Designed for acoustic and electric instruments including bass, guitar and keyboards
• Compact, highly portable, cylindrical shape fits in a backpack for transport
• 12 inches diameter, 11 inches wide, 15 pounds, small enough to fit in airline overhead storage bin or under seat
• Two 10-inch broad frequency range custom side-firing drivers
• One 5-inch forward firing midrange driver with level switch
• Two-way asymmetric crossover
• Omnidirectional sound fills the bandstand and venue
• Bumpers allow compact amp head to mount on cabinet
• Rated at 4 ohms, 600W

AMP Features

• The Clarus S4plus retains two independent channels which accept either instrument or mic inputs [onboard 48v phantom for condenser mics]. The EQ section adds a two band Midrange section for more precise control and flexibility over this critical frequency range making the little head even more adaptable to most any musical instrument.
  
  For those who enjoy the specs-and-nothing-but-the-specs:
  
  >Separately buffered XLR and 1/4-inch input jacks
  >48v Phantom Power for XLR inputs [switchable on/off]
  >10dB gain boost for low output mics
  >4-band EQ section:

  ......Bass: 50Hz +12dB, shelving type
  ......Low-Mid: 250Hz +12dB
  ......Hi-Mid: 1200Hz +12dB
  ......Treble: 8Kz +12dB, shelving type

  >User selectable individual channel features by switching jumper cable inside chassis:
  ......6dB front end gain cut
  ......Speaker emulation with Phase Reverse control
  ......Stereo or Mono preamp output
  >Selectable and sweepable low cut filter
  ......150Hz and below
  >Effects loop with Send and Return
  ......Send also usable as tuner output
  ......Return also usable as Aux input
  >Selectable effects [new program]
  ......Reverb with variable decay time
  ......Delay with variable decay time
  ......Reverb|Delay with variable decay time
  >Illuminated selector switches
  >DI with Pre or Post selector
  ......10 dB pad switch
  ......ground lift switch
  >Headphone output
  >Limiter [switchable]
  >Simulated stereo effects
  ......requires powered cabinets
  >Weight under 5 lbs | 2.3 kilos
  
  And for those others who just want the basic message: The Acoustic Image Clarus2 S4plus offers high fidelity performance for all instruments.
  
  But the real story is about SOUND. Acoustic Image has improved fidelity in the S4plus series with more headroom and dropping the self-noise floor to nearly imperceptible.  This makes a noticeable difference and the sound is transparent even at very high SPLs.

  Solid state amplification just doesn't get any better than this.