The Clarus SL‐2 is a compact, two‐channel integrated amp that accepts both microphone and pickup input signals and blends them into a common output. It is the same size, shape and weight as the existing Clarus SL and Clarus SL‐R amps and it uses the same power amp.
The SL-2 model substitutes TRS [tip-ring-sleeve] 1/4" input jacks in lieu of the standard 1/4" jacks of the standard SL models which adds the capability of using it with microphones [XLR adapter required and one is included].
FREE SHIPPING IN THE U.S.
The features of the SL‐2 are:
-
Extended frequency range, high fidelity sound
-
Light weight: <2.5 lbs. | 1.13 kilos
-
Small size: 2.1 x 7.2 x 7.4 inches | 5.3cm x 18.3cm x 18.8cm
-
Two separate input channels with their own level and tone controls
-
1⁄4 inch Tip Ring Sleeve (TRS) input on each channel that accepts mic or instrument input
-
Switched 48V phantom power and 10 dB gain boost for mic inputs
-
Internal circuit automatically senses input type (TRS for mic or Tip Sleeve for instrument) and connects to correct preamp circuit
-
Four band EQ in each channel
o Low (+/‐12 dB at 30 Hz)
o LowMid(+/‐12dBat250Hz)
o HiMid(+/‐12dBat1200Hz)
o High (+/‐15 dB at 10 kHz)
-
Sweepable low cut filter (30 Hz to 180 Hz) in each channel
-
Master level control
-
Direct out with selectable 10 dB pad, pre/post switch and ground lift
-
Mute switch
-
Selectable internal jumper options for gain and limiter
-
High fidelity, low noise operation: 110 dB SNR at direct out
-
Automatic voltage switching for universal AC mains operation
-
650 Watt output @ 4-ohms (music power) | 350 Watts @ 8-ohms
-
Dual speaker outputs with Speakon connectors
-
Includes padded case